P-52 Transfer Pump

P-52 Transfer Pump


High Output Transfer of Foam and Coatings Chemical Systems

Made in the USA, the lower-height higher output P-52 can transfer 10 gallons per minute in continuous service.

  • Fits in standard 7’ high trailers – lower height
  • Made in the USA
  • High Output 10 gpm – doubling competitive brands
  • Same spare parts as the GHO and IPM OP232C
  • Stainless Steel Construction
  • Wetted and Divorced Fluid Section – lowers are exposed to chemicals
  • Outperforms regular feed pumps – made polyurethane chemicals

The robust design of the GHO returns improved in the P-52; a reliable, stainless steel, high output pump that fits inside a standard 7’ high trailer. The 10 gallons per minute continuous duty flow rate of the P-52 ensures that every proportioner is supplied with incoming material to fit its capacity.

Technical Specifications
Pressure Ratio
10 GPM (37.85 LPM)
Cycles per Gallon
Cycles per Liter
Stroke Length
4″ (10.2 cm)
Maximum Air Pressure
120 psi (8.273 bar)
Air Inlet
1/4 NPT (F)
Fluid Output
3/4 NPT (F)
Air Consumption
2.2 CFM per gal @ 100 PSI (275 cc/s per liter @ 7 bar)
25 lbs (11.4 kg)